printer problems [Archive] - Peachtree Forums

Bradsko

01-11-2005, 12:21 PM

Complere 2005 On 12-21-04 I wrote in with this same problem and even our IT person worked on it, trying different drivers and a variety of things. I still have the same problem-Warning There was no room to store those printer setup perimeters in the form file.

From what we read in past threads many people are having this problem. Did anyone figure out how to fix it? Can anyone help me? I am getting the message when I do payroll and W2's.

Thank you.

P. Eaves

01-12-2005, 11:59 AM

I am having the same problem. I called Peachtree and they were unable to solve the situation. If anyone does come up with a solution I would like to know too. It is very frustrating.

TheWolf

01-12-2005, 05:28 PM

The error is caused by a problem with the print driver. I have solved this error for my customers numerous times. Try this forum for support and see if they can help you.

There is an outside chance that the .frm file itself is damaged.

Bradsko

01-24-2005, 11:06 AM

How can I find out if my problem is the .frm file that may be the outside chance what is wrong with it?

contractcpa

01-28-2005, 01:18 PM

I am having problems with this also. If anybody know hows to fix it, PLEASE post the fix. Thanks.

Lorin Browning

01-28-2005, 03:51 PM

Click on "search" to the right of the Tech support box on the top right. Enter a search term, somthing like "printer setup parameters" and you should find a host of helpful hints. Be careful with the spelling of "parameters". "Perimeters" won't get you there.

Bradsko

01-31-2005, 05:45 AM

I appreciate your suggestion but that suggestion was already given to us in December and we did do that and we tried everything that was suggested and nothing worked.

And we noticed that many Peachtree users are having the exact same problems as we are and asking us to let them know when we get this figured out.

We still need to fix this problem.

M GO BLUE

01-31-2005, 09:21 AM

There is a printer driver that will allow you to print without error. I recently had to use the Laser Jet III driver for a printer that my customer just purchased. Your biggest problem is to find a driver old enough so that it is compatible with peachtree, yet will still allow the printer to print. That driver does exist, you may have to try several before you find the right one